Hello, What is the tightening torque for the water pump screw M6. Appreciate a reply. Thanks.
Hello Johnny, I checked the service manual but there is no indication of the tightening torque in there, so tighten them with feeling.
Best regards, Pieter
Hello Johnny,
please note the following instruction from the workshop manual, this is important to obtain a good o-ring seal:
The tightening for M6 screws are 10-12 Nm
BR Andreas
Thanks, then the screw is of quality 10.9 I guess.
No, it's a normal 8.8 Cheers Andreas
Thank you very much for the reply and Tipps und Tricks.
Kommentare
Hello Johnny, I checked the service manual but there is no indication of the tightening torque in there, so tighten them with feeling.
Best regards, Pieter
Hello Johnny,
please note the following instruction from the workshop manual, this is important to obtain a good o-ring seal:
Best regards, Pieter
The tightening for M6 screws are 10-12 Nm
BR Andreas
Thanks, then the screw is of quality 10.9 I guess.
No, it's a normal 8.8
Cheers Andreas
Hello Johnny,
please note the following instruction from the workshop manual, this is important to obtain a good o-ring seal:
Best regards, Pieter
Thank you very much for the reply and Tipps und Tricks.
Hello Johnny, I checked the service manual but there is no indication of the tightening torque in there, so tighten them with feeling.
Best regards, Pieter
Thanks for the reply.